Hot Selling Multipurpose Sturdy And Durable Mine Wago

Mine Wago:Special vehicles for mine rail transportation. In order to adapt to the narrow conditions of underground tunnels, the external dimensions are compact. There are trucks, people's vehicles, material trucks, etc.

Car Box:A box container for loading material on a mine wagot. The car box of the fixed car box type mine wago mostly adopts a semi-circular car bottom, which is not only convenient for processing, but also conducive to mechanized cleaning of the adhesions on the bottom of the car. The car box is generally made of low-alloy steel plate, which has good heat resistance and corrosion resistance. The thickness of the steel plate mainly considers the requirements of corrosion resistance. In order to increase the rigidity of the box, convex ribs are often pressed on the steel plate, angle steel is added to the mouth of the box, and there are drainage holes at the bottom of the box. The car box of the bottom unloading mine wago is an openable flat bottom. There are wings on both sides of the car box for supporting operation during unloading. The lower mouth has sufficient rigidity to prevent deformation. The longitudinal section of the stationary and tipping-bucket boxes is rectangular, and the bottom-unloading type is trapezoidal.

Frame:Including beams, buffers and axle clamps. The car beam is the main bearing part of the mine wago. In addition to bearing the gravity and traction force of the car box, it also bears additional loads such as shock and vibration during operation; the frame is generally made of special steel, with connectors and buffers at both ends. It is a component that directly bears traction and impact. The buffer originally used a coil spring to absorb the impact load, but it has been gradually replaced by a rubber buffer block. The axle card is the connection between the frame and the wheelset. Most of them are of the plug-in type. The structure is simple, which can improve the running conditions of the wheelset and prolong the service life of the bearing.

Wheel:The walking parts of the mine wagot have two types: open type and closed type. The open wheelset has an end cover, which is easy to disassemble and adjust the bearing clearance, but it is easy for water to enter. The closed wheelset has no end cover. When overhauling and disassembling the bearing, the two sets of bearings pass through the same inner hole, which is easy to cause the inner hole of the wheel to increase and fail.