Operating rules for
mine electric locomotives
1.
Mine electric locomotives must have complete safety devices, such as bells, lights, protective covers, brakes, connectors and leakage and circuit protection devices. Any abnormality shall not operate.
2. Before driving, you must check the front and back, and send out signals to avoid hurting people or breaking all kinds of pipes and lines.
3. The driver of the mine
electric locomotives must obey all kinds of signals, obey the command, and it is strictly forbidden to drive under the influence of alcohol.
4. It is strictly forbidden to drive fast. When encountering curves, exits, construction sites or people ahead, slow down and signal.
5. If the
mine electric locomotives falls off the road during operation, a signal should be sent immediately. The handler must choose a safe location and contact the signal, and conduct unified command to deal with it.
6. The
mine electric locomotives must be rated for traction, and the transportation shall not be overloaded, super wide or super long.
7. The transportation of blasting equipment by
mine electric locomotives must comply with the regulations on the transportation of blasting materials.
8. The
mine electric locomotives transport personnel must carefully check the integrity of the connectors, brakes and components before driving. It is strictly forbidden to mix explosives, flammables and goods in the car, and it is strictly forbidden to pick up the car midway.
9. It is strictly forbidden to stand on both ends of the battery car to prevent squeezing (collision) injuries.
10. When unloading slag, the parking lot and the turning point should be equipped with car blocking protection facilities to prevent falling off the road.
11. Check frequently, keep the mine electric
locomotives clean, and drive in a civilized manner. When the driver leaves, the power supply must be cut off, the brakes must be tightened, and the vehicle should be parked on the safety line with good lighting and warning signs.