Pay attention to the details of the operation of the stationary mine wagon

The existence of mine wagon equipment is a lot of common machinery and equipment for mining production. Our company is an experienced mine wagon manufacturer. With the continuous development of society and economy, the models of mine wagon are gradually changing. The type of mine wagon is a common type of mine wagon. I hope you will understand the details of the work of stationary mine wagon.

When assembling the bearing of the mine wagon, it is necessary to carefully check the dimensions of various parts. The radial and axial clearance of the assembled bearing meets the requirements, and sufficient grease is injected. Mining wheels should be oiled at least once every six months, and must be cleaned and inspected within one year. Damaged bearings, retaining rings and other parts must be replaced.

When carrying out a 90-degree or 180-degree overturning operation of a mine wagon, use a 5-point wire rope cover, and aim at the lifting position when starting.

In the case of accidents such as broken shafts and wheel drops under the vehicle, you should contact the transportation dispatcher in advance. There should be vigilance before and after the train, and a special person is responsible for directing and handling.

Doing a good job with the details of the mine wagon will not only guarantee the production efficiency, but also help the life of the mine wagon. If you want to know other aspects of the mining cart, you can call the company for consultation.